Quality Standard
One of the reasons for our continued growth has been the commitment to manufacturing a quality product. From documentation to process control to final inspection, New Technology Plastics employs a Total Quality Program to ensure that every part is made and shipped meets all customer requirements and expectations. Our Quality Assurance staff utilizes a complete range of conventional measuring equipment and performs in-process and final inspection before shipping customer orders. Parts are inspected using standardized devices, ensuring conformance to print dimensions.
Sustainability & Carbon Reduction Commitment
At New Technology Plastics, we recognize that responsible manufacturing includes environmental stewardship. As a supplier to the commercial aerospace industry, we understand the importance of reducing greenhouse gas emissions and supporting the global transition toward a lower-carbon future.
We have completed an assessment of our Scope 1 emissions and have implemented an action plan to systematically reduce our direct operational footprint. This includes improvements in energy efficiency, equipment optimization, production scheduling, and facility management practices.
Measured Accountability
We believe improvement begins with accurate data. We are establishing baseline measurements and tracking emissions performance to ensure meaningful progress.
Operational Efficiency
As a precision manufacturer, efficiency drives both quality and sustainability. Investments in modern CNC equipment, thermoforming technology, and production planning not only improve delivery performance but also reduce energy intensity per part produced.
Continuous Improvement
Environmental responsibility is not a one-time initiative. We are committed to evaluating additional opportunities to reduce emissions, including energy sourcing, waste reduction, and material optimization as our operations evolve.
We understand that our customers and partners increasingly expect transparency and measurable progress in sustainability. New Technology Plastics is committed to aligning our operations with industry best practices and contributing to a more sustainable aerospace supply chain.
Quality Commitment
At New Technology Plastics we are committed to exceed the requirements of our customers. We believe quality goes beyond just meeting print parameters. It also includes competitive pricing, on-time deliveries and outstanding customer service. We strive to provide quality in all processes and at all levels.
Vision and Goals
Our goal is to continuously meet and exceed our customers expectations in quality, service, and integrity. Our goal is to get to know each customer to develop a personalized relationship. So that we may deliver the best possible service to each individual customer. We are committed as a team to always improve our processes and methods to fulfill this goal.
Custom Manufacturing Quality Policy
New Technology Plastics Custom Manufacturing goal is to meet the needs of our customers by providing quality products and continually improving our processes and methods. We endeavor to deliver on time, every time, defect free products and services.
Quality Clauses
Right of entry
The buyer and buyers customer, and their customers, or any applicable regulatory agency will have the right to enter the supplier’s facility to perform inspection or ensure compliance to the contract.
Record of Retention
Supplier shall retain all records pertaining to material/ mfg process special processes, test and inspection for a minimum of 10 years or as required by the customer; changes to this requirement shall be addressed on the purchase order. Additional quality requirements may apply when referenced in the po.
Amendments
To this order, and/or quality clauses shall be set forth in writing, via purchase order change notice, and /or revisions to the purchase order quality clauses.
Nonconforming Product
In the event that the product is identified as non-conforming after the product has been shipped, the supplier shall provide notification of such escape. Additionally supplier shall control non conforming product to prevent the product from leaving the facility, unless otherwise approved in writing. Obtain organization approval for non conforming product disposition.
Traceability
All parts / material and applicable documents must be identified by a manufacturing lot or batch number by the supplier.
Quality Management System
Suppliers shall implement and maintain a quality management system in compliance with AS9100 and/or ISO9001.
Changes
Supplier shall notify the organization of changes in product and/or process, changes of suppliers, changes of manufacturing facility locations and where required obtain organization approval.
Flow Down
Suppliers shall flow down the requirements listed on the purchase orders including customer requirements to their supply chain.
Personnel Qualification
When required by purchase orders personnel shall be quality to specific processes.
Certificate of Conformance
Certificate of Conformance with Lot and Batch information is required on all orders and shipments.
Test Reports
When required by purchase order test reports shall be provided
ITAR
When required by purchase order, ITAR controls shall be applied.
DFAR
When required by purchase order DFAR controls shall be applied.
Sampling Plan
When specified on purchase order, all inspections used for acceptance shall be conducted to a minimum sample acceptance level in accordance with ANSI/ASQ z1.4 sampling table 1 for inspection activities. General inspection level (ii). Lot acceptance shall be at zero. Reject shall be at one.
Monitoring of Supplier
New Technology Plastics suppliers shall be measured against a goal of 90% quality and 90% delivery. New Technology Plastics may choose to flow down a corrective action request any time a supplier is below the goal. Suppliers may be subject to removal from New Technology Plastics Approved Supplier List if the supplier does not respond to the corrective action request in a timely manner.
Counterfelt Prevention
Suppliers shall purchase all products directly from the original manufacturer, from distributors, reseller or aftermarket supplier who can provide full traceability back to the original manufacturer. Product shall only be purchased from the original manufacturer or their authorized representative. Suppliers are responsible for providing any C of C and test reports as required by the purchase order.
Awareness
Suppliers shall ensure persons performing work affecting New Technology Plastics are aware of:
- Their contribution to product or service conformity
- Their contribution to product safety
- The importance of ethical behavior
Delegation Authority
Delegation for verification and approval of test reports contents
We are your solutions specialist
Distribution
New Technology Plastics inventories a wide selection of general-purpose and high-performance plastics in sheet, rod, tube, and films. Whatever your need is New Technology Plastics is your best choice.
Machining
We specialize in the machining and fabrication of general-purpose and high-performance plastics for the aerospace, medical, food-processing, and general OEM companies.
Thermoforming & Assembly
Our award-winning plastics manufacturing services and quality certifications allow us to serve a variety of Aerospace, High-Tech, Medical and OEM Industrial and Commercial industries.
Fabrication
We specialize in the machining and fabrication of general-purpose and high-performance plastics for the aerospace, medical, food-processing, and general OEM companies.
Engineering
At New Technology Plastics, we offer a wide variety of engineering services to assist our customers with material selection and to help maximize part performance. We assist our customers by helping ensure realistic tolerances and geometrics when working with plastic materials.
Tooling
New Technology Plastics offers complete in-house mold making and tooling capabilities. Our team of skilled and experienced people are equiped with the latest technology in CAD-CAM and are capable of tackling the most challenging projects.
OUR MISSION IS OUR CUSTOMERS COMPLETE SATISFACTION
Wide Material Selection | Highly Trained Service Team | Instant Processing And Delivery | Low Minimums
